Ribbon Lights Pro grade, Indoor/Outdoor, Solid color, Double Density, 24V

Double number of LEDs

2oz high grade copper circuit board

Higher operating voltage (24V)

Minimized voltage drop

Male/female connections on both ends of reel

Higher voltage and heavy copper gauge significantly reduces voltage drop. The results are improved consistency of brightness and color throughout the ribbon. 


Lighting just got easier! CYRON SCRZ3 White Ribbon Lights will make it possible to add lighting in spaces never before possible.

CYRON Ribbon Lights are the answer for:

Long linear runs 

Curved surfaces 

Small spaces with limited or no ventilation 

Shelving units 

Edge lighting glass/Acrylic 

Signage 

Soffit lighting / crown moldings

Trailers/RV interiors 

CYRON white ribbons offer great ease of installation for long linear runs. 3M tape transfer on the back for easy peel and stick. Can be cut every 4 inches. Using tri-chip LED technology, each SCR3 LED produces 3 times the output of a single SMD LED used in SCR1 series.   

DIMMING:

IF YOU HAVE A WALL DIMMER: Can be dimmed using CYRON dimmable drivers (PS35-MP12D-I, PS90-MPD-I).

Dimming on the low voltage side with DIM18 which has a traditional "knob".

Dimming on the low voltage side with DIM100RF which has a wireless remote. 30seconds dimming cycle and on/off button.  

3.6W/ft max 

Common anode 

For use with 24VDC controllers

0.45" x 16.5ft (5 meter)

Cut point 4"

0.5" OC LED spacing

2oz copper PCB

IP65

Resin covered PCB

3M tape transfer backside

---